Air Purifiers

Replacement hood for Unison CE-Approved Powered Air Purifying Respirator (Non-Medical)

• Includes: 2 filters, 14 meltblown cloth, 5 stainless steel mesh
• Meltblown cloth filter layer thickness is 1mm. Must be replaced after 1 day of use.
• Stainless steel mesh thickness is .13mm/60 mesh. Must be replaced every 2-3 days.
• Filters filtration efficiency is 99.97%. Must be replaced when air volume is insufficient, PAPR alarm goes off or every 15 days of use.

• Start car engine
• Place the unit in a car cup holder
• Ensure that the cup holder is empty, as air enters from the lower side of the unit and air is released on the top portion of the unit
• Connect the USB cord to the Flotech Autosafe unit and to the car power supply outlet
• Press the power button for 3 seconds, the unit will switch ON
• Negative ions are produced once the unit is switched ON
• Choose air speed
  • Red - High air speed
  • Blue - Medium airspeed
  • Green - Low air speed
• Replace air filters after 3-6 months of usage for moderate air quality, filter replacement will vary on the environment, air quality, and frequency usage
• Turn OFF the unit, detached from the power source prior to leaving the car. Turn off source when replacing the filter
• For safety: Do not leave the unit inside a very hot car, the temperature must not exceed 40 degrees Celcius

• Negative ions production: 12 million
• Product size: 6.65x2.75 inches
• Rated voltage: 5V
• Rated current:400MA
• Power: 2W

Caution:

• Keep away from children
• Do not disassemble
• Do not soak in water
• Do not leave in high temperature
• Disconnect from the power source & discontinue the use when damaged or exposed to water

It contains a complete HEPA, carbon, photocatalyst and particle filter set.

Captures up to 99% of airborne dust as well as pollen as small as 0.3 microns from air passing through the filter.

Active carbon filter captures large particles as well as common household odors by absorbing them in the active carbon filter.